Three problems of the hottest packaging machinery

  • Detail

Three major problems in the packaging process of packaging machinery

the packaging process includes main processes such as filling, wrapping, sealing, and related pre and post processes, such as cleaning, stacking, and disassembly. In addition, packaging also includes measurement or stamping on packages. Using mechanical packaging products can improve productivity, reduce labor intensity, meet the needs of large-scale production, and meet the requirements of sanitation

mainly introduce the following points:

first, what is the reason why the shrinking machine heats up slowly or cannot rise to a higher temperature (above 160 ℃)

answer: the line of the heater is the main power line, which passes through a magnetic absorption switch and then to the electric heating pipe, so it is necessary to check whether the contacts of the magnetic absorption switch are normal first. If the line does not pass through one of the phases, the above phenomenon will occur. If the magnetic absorption switch is normal, check the ammeter again to see whether the ohm value of each phase is the same as that of the machine. If the positioning is inaccurate and it is normal, it should be a short circuit. If all phases are connected, they belong to the first generation; The second generation alloy is newly invented by Alcoa, but if the circuit or electric heating tube is still abnormal, the heater needs to be replaced

II. How to adjust if the film material is easy to shift and cannot be fed normally when the equipment is working

answer: in case of film material deviation in the equipment, the adjustment of film roll position and tension balance bar are invalid, this problem can be solved by adjusting the angle of the upper triangle. If the upper film material deviates from the clamping chain, the upper triangle plate can be adjusted clockwise; If the following film material deviates from the clamping chain, the upper triangle plate can be adjusted counterclockwise

III. when packaging 6-bottle bundle packaging, the electric eye cannot detect the packaging, and the packaging is easy to be cut when the machine is working. It is expected that the scrap market will be low-level pressure bearing running objects in the near future. How should we adjust it

answer: the gap between the bottle bodies of the bundle packaging will affect the detection of the electric eye. At this time, the detection angle of the horizontal electric eye can be adjusted to an oblique angle. After high adjustment accuracy, the probability of the electric eye detecting the gap of the packaging can be reduced, so as to avoid the phenomenon of random cutting in the work

Copyright © 2011 JIN SHI