Foshan double faced plastic coated steel pipe fact

2022-08-22
  • Detail

Foshan double-sided plastic coated steel pipe factory

Foshan double-sided plastic coated steel pipe factory

source network release time: 04:01:01

Foshan double-sided plastic coated steel pipe factory

[dragon] Cangzhou Longdu pipeline company: plastic coated pipes have excellent corrosion resistance and relatively small friction resistance. Epoxy resin coated pipes are suitable for the transportation of water supply and drainage, sea water, warm water, oil, gas and other media, while polyvinyl chloride (PVC) coated pipes are suitable for the transportation of drainage, sea water, warm water, oil, gas and other media. The inner and outer surfaces of steel pipes can be coated or only the outer surface can be coated as required. Plastic coated pipes cannot be connected by welding, but only by thread or flange. The plastic pipe coated with ABS resin can be mixed with a variety of resins to form a blend. It is a steel plastic composite product with steel pipe as the base pipe, plastic powder as the coating material, a plastic layer on its inner surface, and a plastic layer or other material anti-corrosion coating on its outer surface. In the construction of water supply pipeline, pipes with nominal diameter less than 500mm, plastic coated pipes and clamp connection are selected. If the base pipe of water supply plastic coated pipe is straight seam welded steel pipe, it shall meet the requirements for the base pipe; If the base pipe is spiral seam submerged arc welded steel pipe, it shall meet the requirements for the base pipe; If the base pipe is seamless steel pipe, it shall meet the requirements of 3 pairs of base pipes. If the base pipe is other steel pipes, it shall meet the requirements of national and industrial standards for the base pipe. The above is the capacity and construction requirements of plastic coated steel pipe. Pay attention to these problems during construction to ensure proper use

at the same time, Foshan double-sided plastic coated steel pipe manufacturing plant, because the flange connection plastic coated spiral steel pipe is treated in a similar way on the steel pipe surface, which makes the plastic coated steel pipe have good sealing. When used as the sleeve of the cable, the signal of the cable will not be interfered by the external signal at all,

but the overall situation remains declining. In terms of the inventory sub regional index, the inventory index of the southwest and northeast urban areas decreased *, and the rest were the urban areas of North China and Central South China. In terms of supply and demand performance, China's crude steel output increased by 6% year-on-year in the first two quarters of this year, with an average daily output of 2.4926 million tons of crude steel, an increase of 14100 tons over last year. The peak social inventory of steel circulation is 2million tons higher than that of last year. After six months of digestion, the current social inventory of steel is less than that of the same period last year. To a certain extent, it also introduces that the demand for steel this year is not weak. Second, the inventory of steel circulation market is stable and falling. In July, the removal of social inventory of steel slowed down significantly

diameter range DN cut-off barrel heater 15 -- DN plastic coated steel pipe is a green environmental protection pipe with anti-corrosion, corrosion resistance, non-toxic and non radiation, which is based on welded steel pipe and seamless steel pipe, and the inner and outer walls are coated with epoxy resin or polyethylene powder. It is applied to various fluid transportation. Pretreatment chemical immersion tank method and physical sand blasting method play an important role in building fire protection system, and epoxy resin steel pipe gradually replaces galvanized steel pipe. Next, we will introduce the production process of internally and externally coated epoxy resin steel pipe, the performance of its powder (epoxy resin), and the product performance of internally and externally coated epoxy resin steel pipe When spraying, the epoxy resin powder has not been completely fused to the inner and outer walls of the substrate. After 30 minutes of preheating and curing, the curing agent in the epoxy resin is completely cured, making the coating adhesion of the inner and outer walls stronger, and the thermosetting powder characteristics fully appear. It has excellent comprehensive performance, strong corrosion resistance and mechanical property, good chemical stability and water resistance, and has the functions of drag reduction, corrosion prevention, compression resistance, antibacterial, etc. It is generally not restricted by the transmission medium, and the plastic coating has a strong binding force with steel

main purpose and scope of application: the coated composite pipe is a general pipe in coal mines, which can be used for water supply and drainage, positive pressure ventilation, negative pressure ventilation, grouting and gas drainage in coal mines. It cannot be used for other purposes, and the use pressure must not be. The products are related to highway, tunnel, civil, construction, industry, chemical industry, electric power, petroleum, medicine, ocean, natural gas, shipbuilding, agriculture, coal mining and other industries. In terms of hardware, the quality of steel pipes is ensured, which makes users feel at ease and satisfied. Hot dip plastic steel pipe has superior mechanical properties. The products are widely used in water supply and drainage, fire sprinkler, central air conditioning circulating water, deionized purified water, electro-optic cable sheath and other fields. 1.2 rotational molding process: the steel pipe is heated after pretreatment. While the steel pipe rotates, polyethylene powder is evenly rolled on the inner wall, and then cured to form a steel plastic composite product. Anti corrosion steel pipe process introduction: 1. Single layer fusion bonded epoxy powder anti-corrosion: the epoxy powder layer has become one of the leading pipeline external anti-corrosion coatings because of its excellent anti-corrosion, insulation and long service life, which can be divided into ordinary and reinforced types. According to the different internal coating materials, it can be divided into: introduction to the process of anticorrosive steel pipe: 1. Single layer fusion bonded epoxy powder anticorrosion: the epoxy powder layer has become one of the leading external anticorrosive coatings for pipelines because of its excellent anticorrosion, insulation and long service life, which can be divided into ordinary and enhanced types. In practical application, steel pipe is not only as simple as conveying liquid, but also has a good role for solid, and it is also a very economical pipe. Plastic coated steel pipes have excellent corrosion resistance and small friction, and are suitable for the transportation of water supply and drainage, seawater, warm water, oil, gas and other media. In terms of hardware, the quality of steel pipes is ensured, which makes users feel at ease and satisfied

price list of internal and external plastic coated steel pipes, "mqb0y7" plastic coated steel pipes are connected according to the following methods: 1. Screw connection; 2. Flange connection 3. Groove clamp connection 4 Bimetal connection (our company provides technical guidance when direct welding is required in special fields)

reference standard: (cecs125:2001) technical specification for types of work of steel plastic composite pipe for building water supply - design, installation, inspection and acceptance

product features:

1 Anti corrosion and anti scaling of plastic coated steel pipes inside and outside, with overcurrent, overvoltage, overspeed, overload and other protective devices, anti bacteria, without cleaning the circulating water pipeline

2. The internal and external plastic coated steel pipe materials have anti-corrosion properties, and there is no need to pickle, and there is no need to pre film the steel pipe for anti-corrosion protection in the working state

3. When the internal and external plastic coated steel pipe unit is overhauled, there is no need to take shutdown and anti-corrosion measures to vent the circulating water

4. Plastic coated steel pipes inside and outside have no high requirements for circulating water temperature

5. Plastic coated steel pipes inside and outside are energy-saving and environmental friendly

the surface of epoxy resin water supply pipe coating inside and outside the water supply pipe of Foshan double-sided plastic coated steel pipe manufacturer is smooth and beautiful, and the appearance color can be selected at will. Because the inner wall is smooth, it can prevent the breeding of microorganisms, and the transmission fluid resistance is small, which can increase the flow and save energy

the coating variety is internally coated with modified epoxy resin powder coating or high-density polyethylene powder coating, and the thickness of the internal coating is ≥ 0.4mm. The coating layer should be smooth and flat, without scratches, cracks, pinholes, adhered foreign matters and other defects. The outer coating of steel pipe shall be red (fire protection), black or gray (water transmission). The coated steel pipe shall have clear and durable marks, which shall at least include: product model, base pipe specification and wall thickness, executive standard, manufacturer's name or trademark, production date or batch number, etc. The connection form of coated steel pipe with thread, flange, groove connection and bimetal welding shall comply with the provisions of gb/t 7306.2, gb/t 9119 and gb5135.11. Large diameter pipes are welded (lining stainless steel repair free technology

water supply plastic coated steel pipe has both the high strength of ordinary steel pipe and the anti-corrosion performance of plastic grease products. The anti-corrosion technology of plastic coated steel pipe manufacturers for underground coal mine is developing rapidly, especially in the coating and coating of the outer wall of the pipe, the detection of the corrosion condition of the pipe, the repair of the pipe and the internal cleaning of the pipe, many new materials, equipment and technologies have been studied and developed , which provides a favorable guarantee for pipeline safety. Second, thickness, here is mainly to distinguish the degree of use and manufacturing process of goods. The thickness of goods should be within the specification range, and there is no big difference in the thickness test of different cross sections. This is to manufacture exquisite goods. The surface of water supply pipe coated with epoxy resin inside and outside is smooth, beautiful, and the appearance color can be selected at will. Because the inner wall is smooth, it can prevent the breeding of microorganisms, and the transmission fluid resistance is small, which can increase the flow and save energy

it has strong corrosion resistance, drag reduction, corrosion prevention, compression resistance, antibacterial and other functions, and has good chemical stability and water resistance. It is generally not restricted by the transmission medium, and there are no worries of "running, emitting, leaking and cracking". It is widely used in the fluid transportation of urban construction water supply, fire protection, petroleum, gas, chemical industry, sewage, mining, agricultural irrigation and other fields. It is used to replace the traditional pipes such as cast pipes and steel pipes with high energy consumption, easy rust, scaling, short service life and heavy transportation. Qinglongshan brand plastic coated epoxy resin composite steel pipe product characteristics: excellent pressure bearing performance. Excellent corrosion resistance, small coefficient of thermal expansion, no shrinkage deformation. The surface is smooth, the fluid resistance is small, no scaling, and it is not suitable for breeding microorganisms. 1.2 rotational molding process: the steel pipe is heated after pretreatment. While the steel pipe rotates, polyethylene powder is evenly rolled on the inner wall, and then cured to form a steel plastic composite product. This kind of plastic coated and lined pipe fittings should have more stable properties. Many liquids are corrosive to metals. In addition, if they are constantly immersed in water, the more stable metal will show changes in properties, so it is more reliable to choose plastic as coating. When choosing pipes, we certainly hope to buy products that are * cost-effective. In addition, we can also use * products. However, not every product on the market can meet our needs, so we can definitely identify a material at the time of choosing, and then purchase it continuously or regularly

6. Plastic coated steel pipes have good weather resistance and adapt to harsh natural environment

7. Internal and external plastic coated steel pipes and internal and external epoxy composite steel pipes have a long service life, with a theoretical service life of 50 years, which is more than 3 times that of general steel pipes, and also extend the service life of units and equipment

8. The plastic coated steel pipe inside and outside is different from the plastic coated steel pipe for water supply and drainage. The plastic coated steel pipe for circulating water has been improved in raw materials and production technology, which is more suitable for the use environment of air conditioning circulating water

why is plastic coated steel pipe designated as an environmental protection material by the state? By coating plastic on steel pipes for corrosion prevention, the corrosion and scaling problems of ordinary steel pipes in the process of buried and water transmission are solved. The phenomenon of pipe blockage and spray blockage is eliminated, and the service life of the pipe is improved. The service life of the plastic coated steel pipe is more than 50 years. The powder coating of plastic coated steel pipe is added with flame retardant and modified with epoxy resin powder. The coating has superior temperature resistance and will not burn or soften in long-term use

what are the specific requirements for technology of plastic coated composite pipes in Foshan double-sided plastic coated steel pipe factory and the importance of doing according to the requirements are all topics we study, so the following content is to explain such content in detail

the coated composite pipe should be stored straight indoors, and the distance from the heat source should not be less than 1m. When stored in the open air, it must be covered with a canopy and should not be stored outdoors in direct sunlight and cold places for a long time. During the storage of coated composite pipes

Copyright © 2011 JIN SHI